*Custom Pedalboard*
Obviously something this big would be a huge pain in the ass to transport so I'm probably gonna make an abbreviated version of it one of these days.
Some nice gear you have there!
Here's my own board, which I don't think I ever posted here before, and in its current size is already a pain in the ass to haul around. Not pictured is my Volume pedal, which I place at the left side of the board. Between this and the amp, I have a multicable consisting of 4 mono and 1 stereo jacks. It's been my preferred setup for years, although I used to have a smaller board once..
The setup is quite complicated, but I'll try to make it clear.. The Boss NS-2 acts as some sort of hub, containig both the amp, effects and the loop..
GUITAR -> TC Polytune -> EHX Small Stone (Phaser) -> Boss NS2 Input
Boss NS2 Send -> Way Huge Green Rhino (Overdrive) -> Ibanez TS9DX (2x Tubescreamer) -> DOD Carcosa (Fuzz) -> Dunlop CryBaby Wah -> AMP INPUT
AMP FX SEND -> EHX LPB1 (Solo Boost) -> Boss NS2 Return
Boss S2 Output -> MXR Carbon Copy (Delay) -> Volume Pedal (not depicted) -> AMP FX RETURN
The two pedals in the lower left corner are channel switchers for a Mesa/Boogie Mk. III (made by now defunct Voodoo Labs) and a custom switch for an ENGL Fireball 60 to switch both channels at once (the original Z-4 switch I own as well is a) way too big and b) requires you to step on two switches at the same time, which is stupid. I modified that one as well, but point a still stands - this is way more compact for normal use).