Today I have made a scientific breakthrough. After much research I discovered that in fact, keys are not the primary piece to the mouse trap. It's the key-chain attached. Upon this discovery, I quickly went to my room and retrieved my old key-chain collection. Upon doing this, I drafted and put together probably my greatest invention to date.
Ladies and gentlemen of the scientific community, I present to you the Key-chain orgy.
This excellent piece of mouse trap technology works on a newly developed pressure plate system. Here is the photo of the entire thing for starters.
How it works, is the mouse is firstly attracted and lured in by the pile of key-chains, as shown below. As you can see, the pressure plate is well hidden underneath the key-chains, with two fuses attached leading to the rest of the trap.
Upon stepping on the pressure plate, the trigger sets off in two directions. The first going towards a carefully set up and aimed NERF handgun, pointed directly in the direction of the mouse, and the direction he shall soon be heading. As the trigger sets off, the gun is then fired towards the mouse, sending him flying forward, underneath where he shall meet his final demise.
Here we have the final part of the trap. As the mouse is sent flying forward, he shall end up landing directly underneath the shown guitar, along with two razor sharp knives held together by some shoelace.
During this time, I set up the second fuse to the shown lighter, which is in position to burn the shoelaces and drop the knives right down on the location where the mouse should have landed. If all of my calculations and measurements are correct, it should pierce either the mouses neck or go straight through his pelvis, or both if I was 100% correct.
Here is an additional picture, which is over the pressure plate which ties the entire project together.